Pulished Date March, 2019
ID: 8142
Share on
Share on

Polymer Binder Market By Type (Acrylic, Vinyl Acetate, & Latex), By State (Liquid, Powders, High Solids), By Application (Coatings, Sealants & Adhesives, Textiles, Papers, Construction Additives), By Region - Industry Analysis, Size, Share, Growth, Trends, And Forecasts (2018-2023)

Pulished: March, 2019
ID: 8142
Pages: 175

Market overview:

The Global Polymer Binder Market is witnessed to grow moderate CAGR in the forecast period (2018-2023). The market is majorly expected to grow in Asia Pacific region due to rise in economies of developing countries. This region has the fastest growing economies of the world.

Recent Developments:

  • Recently Polymer modified bitumen (PMB) is being used in asphalt pavement construction as it improves rutting and fatigue cracking of the pavement, & improves the life of the existing pavement on resurfacing.
  • In a latest study carried by National Tsing – Hua University, Taiwan found that the electrochemical performance of Li ion batteries can improve when aqueous polymer binder is used as an ionic medium.
  • Recently, Department of Civil Engineering, Yarmouk University, Jordan & Department of Civil and Environmental Engineering, Michigan State University, USA carried a research on Alkali - activated binder. It was found that Alkali – activated binder exhibits larger drying shrinkage than normal PPC. [1]

Polymer Binder market value & expected growth:

The Global Polymer binder market was $ 24.32 Billion in 2018. It is expected to be around $ 35.6 Billion in 2023 with a current CAGR of 7.92%.

Polymer binder market Drivers & Restraints:

The rise in demand for better asphalt substituent’s, textiles, & increased consumption of paints & varnishes have led to growth in the Polymer Binder market. Polymer binders are mixed to normal asphalt & concrete to create better green substituent. The use of binders not only increases the structural & mechanical properties of the material but is also environment friendly. The growth in construction industry is likely to increase because of lot of materials such as adhesives, binder, tiles, concrete mixes, water proof coatings, paints, grouting mixes.

Use of Polymer binders in solvents and coatings is also one of the reasons for boosting the growth the market. Readily available raw water materials, low - cost, & alterable polymer mixes enhance the market revenues.

Increase in waste generated and problem of disposal of construction waste has demanded for the rise in bio polymer binders such as green concrete mixes, bricks, & paints & varnishes.

High initial investments in the R& D, strict environmental policies, & lack of awareness in many regions such as some parts of Latin America, Middle East & Africa, & eastern Asia Pacific region are some of the inhibiting factors for the market’s growth. 

Market Segmentation:

  • By Type (Acrylic, Vinyl Acetate, & Latex)
  • By State (Liquid, Powders, High Solids)
  • By Application (Coatings, Sealants &  Adhesives, Textiles, Papers, Construction Additives)
  • By region (North America, Europe, Asia Pacific, Middle East & Africa, Latin America)

By geography the market is segmented into Latin America, Asia Pacific, Europe, North America, and Middle East and Africa. Among them Asia Pacific region has the largest market, followed by North America. Asia Pacific is the largest consumer of this market as it consists of world’s fastest growing economies such as India, China, and Korea. Construction Polymer binders are the most favored sector of growth in the market.

Market Key Players:

Some of the major market players are BASF  (Germany), Wacker (Germany), DOW Du Pont (United States of America), Celanese (United States of America), Arkema (France), Synthomer, Dairen chemicals, Stahl (United States of America), & OMNOVA.

The Dow Du Pont has recently developed exceptionally durable and resistive polymer concrete with HYPERLAST LU & HYPERLAST LP. HYPERLAST is advantageous as it has low viscosity for high aggregate loadings, high durability & flexibility, high impact resistance.

Stahl has developed Bio – based Poly matte that is used in designing luxurious products coated with matte, which is highly resistant to scratching, dulling, and discoloring. It is self sustainable & retentive material.

Stahl has created a new technology of Elastomeric coatings for automobile sector. RelcaSil is very luxurious cost effective coating for automobiles; it’s less glossy & has excellent noise performance. RelcaBond is another product that provides very good adhesive properties to vulcanized rubber tires with enhanced chemical resistance, flexibility, durability, & flock density.

Research Report Key Highlights:

  • The evaluation of the current market for your product or services and the future implications of the market
  • Addresses the opportunities by better understanding the market through size estimates and growth rate analysis to forecast the market for the future Extensive segmentation to understand the dynamics of the market at a very granular level by splitting down the market to the smallest segment.
  • Addresses the key market dynamics involving the drivers, restraints, and challenges with an aim of providing insights for gaining market share.
  • The factors responsible for the shaping of the industry as it is as a result of the competitive environment are analyzed through Porter’s Five Forces.

1. Introduction                                 

                1.1 Market Definition                    

                1.2 Study Deliverables                  

                1.3 Base Currency, Base Year and Forecast Periods                           

                1.4 General Study Assumptions                

2. Research Methodology                                           

                2.1 Introduction                              

                2.2 Research Phases                      

                                2.2.1 Secondary Research            

                                2.2.2 Primary Research 

                                2.2.3 Econometric Modelling     

                                2.2.4 Expert Validation  

                2.3 Analysis Design                         

                2.4 Study Timeline                          

3. Overview                                      

                3.1 Executive Summary                

                3.2 Key Inferences                         

                3.3 Epidemology                             

4. Drivers, Restraints, Opportunities, and Challenges Analysis (DROC)                                      

                4.1 Market Drivers                          

                4.2 Market Restraints                    

                4.3 Key Challenges                         

                4.4 Current Opportunities in the Market               

5. Market Segmentation                                              

                5.1 Type                              

                                5.1.1 Introduction           

                                5.1.2 Acrylic       

                                5.1.3 Vinyl Acetate         

                                5.1.4 Latex         

                                5.1.5  Y-o-Y Growth Analysis, By Product               

                                5.1.6  Market Attractiveness Analysis, By Product             

                                5.1.7  Market Share Analysis, By Product               

                5.2 By State                       

                                5.2.1 Introduction           

                                5.2.2 Liquid        

                                5.2.3 Powder    

                                5.2.4 High Solids              

                                5.2.5 Y-o-Y Growth Analysis, By Type      

                                5.2.6 Market Attractiveness Analysis, By Type     

                                5.2.7 Market Share Analysis, By Type      

                5.3 Application                 

                                5.3.1 Introduction           

                                5.3.2 Coating     

                                5.3.3 sealants & Adhesives         

                                5.3.4 Papers      

                                5.3.5 Textiles    

                                5.3.6 Construction industry         

                                5.3.7 Y-o-Y Growth Analysis, By Application         

                                5.3.8  Market Attractiveness Analysis, By Application       

                                5.3.9  Market Share Analysis, By Application        

6. Geographical Analysis                                              

                6.1 Introduction                              

                                6.1.1 Regional Trends    

                                6.1.2 Impact Analysis     

                                6.1.3 Y-o-Y Growth Analysis        

                                       By Geographical Area

                                       By State

                                       By Type

                                       By Application

                                6.1.4  Market Attractiveness Analysis     

                                       By Geographical Area

                                       By State

                                       By Type

                                       By Application

                                6.1.5  Market Share Analysis      

                                       By Geographical Area

                                       By State

                                       By Type

                                       By Application

                6.2 North America                          

                                6.1.1 Introduction           

                                6.1.2 United States         

                                6.1.3 Canada     

                6.3 Europe                         

                                6.2.1 Introduction           

                                6.2.2 U.K             

                                6.2.3 Spain         

                                6.2.4 Germany 

                                6.2.5 Italy           

                                6.2.6 France      

                6.4 Asia-Pacific                 

                                6.3.1 Introduction           

                                6.3.2 China         

                                6.3.3 India          

                                6.3.4 Japan        

                                6.3.5 Australia  

                                6.3.6 South Korea           

                6.5 Latin America                            

                                6.4.1 Introduction           

                                6.4.2 Brazil         

                                6.4.3 Argentina

                                6.4.4 Mexico     

                                6.4.5 Rest of Latin America         

                6.6 Middle East & Africa               

                                6.5.1 Introduction           

                                6.5.2 Middle-East            

                                6.5.3 Africa        

7. Strategic Analysis                                       

                7.1 PESTLE analysis                         

                                7.1.1 Political     

                                7.1.2 Economic 

                                7.1.3 Social         

                                7.1.4 Technological         

                                7.1.5 Legal          

                                7.1.6 Environmental      

                7.2 Porter’s Five analysis                              

                                7.2.1 Bargaining Power of Suppliers        

                                7.2.2 Bargaining Power of Consumers    

                                7.2.3 Threat of New Entrants     

                                7.2.4 Threat of Substitute Products and Services

                                7.2.5 Competitive Rivalry within the Industry      

8. Market Leaders' Analysis                                        

                8.1 BASF                             

                                8.1.1 Overview

                                8.1.2 Product Analysis   

                                8.1.3 Financial analysis  

                                8.1.4 Recent Developments       

                                8.1.5 SWOT analysis       

                                8.1.6 Analyst View          

                8.2 Wacker                        

                8.3 Dow Du Pont                             

                8.4 Celanese                     

                8.5 Arkema                        

                8.6 Synthomer                 

                8.7 Dairen Chemicals                     

                8.8 Sthal                              

                8.9 OMNOVA                   

9. Competitive Landscape                                           

                9.1 Market share analysis                            

                9.2 Merger and Acquisition Analysis                        

                9.3 Agreements, collaborations and Joint Ventures                          

                9.4 New Product Launches                          

10. Market Outlook and Investment Opportunities                                          


                a) List of Tables                

                b) List of Figures                              

  • Global, regional and country-level analysis and forecasts of the study market; providing Insights on the major countries/regions in which this industry is blooming and to also identify the regions that are still untapped
  • The segment-level analysis in terms of By Diagnostic Wearable Devices, and Therapeutic Wearable Devices along with market size forecasts and estimations to detect key areas of industry growth in detail
  • Identification of key drivers, restraints, opportunities, and challenges (DROC) in the market and their impact on shifting market dynamics
  • Study of the effect of exogenous and endogenous factors that affect the global market; which includes broadly demographic, economics, and political, among other macro-environmental factors presented in an extensive PESTLE Analysis
  • Study the micro environment factors that determine the overall profitability of an Industry, using Porter’s five forces analysis for analysing the level of competition and business strategy development
  • A comprehensive list of key market players along with their product portfolio, current strategic interests, key financial information, legal issues, SWOT analysis and analyst overview to study and sustain the market environment
  • Competitive landscape analysis listing out the mergers, acquisitions, collaborations in the field along with new product launches, comparative financial studies and recent developments in the market by the major companies
  • An executive summary, abridging the entire report in such a way that decision-making personnel can rapidly become acquainted with background information, concise analysis and main conclusions
  • Expertly devised analyst overview along with Investment opportunities to provide both individuals and organizations a strong financial foothold in the market
  1. Global Polymer Binder Market Market By Region, From 2018-2023 ( USD Billion )
  2. Global Polymer Binder Market Market By Type, From 2018-2023 ( USD Billion )
  3. Global Acrylic Market By Region, From 2018-2023 ( USD Billion )
  4. Global vinyl acetate Market By Region, From 2018-2023 ( USD Billion )
  5. Global latex Market By Region, From 2018-2023 ( USD Billion )
  6. Global Polymer Binder Market Market By State, From 2018-2023 ( USD Billion )
  7. Global Liquid Market By Region, From 2018-2023 ( USD Billion )
  8. Global Powder Market By Region, From 2018-2023 ( USD Billion )
  9. Global High Solids Market By Region, From 2018-2023 ( USD Billion )
  10. Global Polymer Binder Market Market By Application, From 2018-2023 ( USD Billion )
  11. Global Coatings  Market By Region, From 2018-2023 ( USD Billion )
  12. Global Sealants & Adhesives Market By Region, From 2018-2023 ( USD Billion )
  13. Global Papers Market By Region, From 2018-2023 ( USD Billion )
  14. Global construction additives Market By Region, From 2018-2023 ( USD Billion )


$ 1234 4255


Research Areas